Application of Virtual Reality to Space Robotics Operations
This paper discusses a Virtual Reality (VR) simulation under development by the Automation and Robotics (A&R) Division at the Johnson Space Center (JSC). Over the past twelve years,...
Goals and Requirements for Scientific Lunar Rovers
The detailed science requirements for future lunar rovers should, of course, be based on achievable science goals and objectives. It is clear that lunar geoscience will benefit by robotic...
A Stewart Platform Lunar Rover
A lunar version of the Robocrane is being developed at the Robot Systems Division of the National Institute of Standards and Technology (NIST) to address the needs of NASA researchers....
The Kinematic Design of a Robotic Large Space Structure Construction Service
Researchers at the University of Maryland's Robotics Research Lab are applying a kinematic rapid proto-typing methodology to the development of a commercial robotics service for the construction...
The Optimal Selection of Robot Modules for Space Manipulators
Monolithic robot systems are poorly suited to the broad requirements and uncertainties of space automation applications. Designers have considered building many robots, each of which can...
A New Robotic System Concept for Automating Highway Maintenance Operations
The purpose of this paper is to present the Tethered Mobile Robot (TMR) concept, a new robotic system for automating highway maintenance operations. The operational requirements of this...
Bechtel Automated Lift Planning System
This paper describes the Automated Lift Planning System (ALPS) software developed by Bechtel Corporation. The software was developed to assist the construction engineer with planning and...
Dynamic Analysis of a High Speed Transport Model by Using a Piecewise Continuous Timoshenko Beam Model
Conventional treatment of structural dynamic analysis and control is based on the finite element structural model. But such a treatment uses a very large number of elements which is usually...
Using a Small Satellite Bus As a Dedicated Platform for On-Orbit CSI Experiments
Control-Structure Integration (CSI) technology will be needed for the success of many future space missions, however, this technology will not be seriously considered for use by program...
Braced Double Skinned Structure in Lunar Application
A parametric study is designed to evaluate a proposed Braced Double Skinned roof structure utilizing extrapolated theoretical solutions i.e. Navier's solution and Levy's solution. A Finite...
A Conceptual Study of A Solar Power Satellite Using Centrifugal Force
We studied the self deployable Solar Power Satellite (SPS) using centrifugal force in order to explore ways in reducing construction costs. We designed a 340 kW SPS, and studied the unfolding...
Thermoelastic Theory of Cylindrical Sandwich Shells with Piezoelectric Sensors or Actuators
Cylindrical sandwich shells with piezoelectric longitudinal and ring elements bonded to the outer and inner surfaces are considered in this paper. Thermal effects are included in the analysis,...
Modal Interaction in the Response of Laminates
A higher-order shear-deformation theory is used to analyze the interaction of two modes in the response of thick laminated rectangular plates to transverse harmonic loads. The case of...
Comparison of Donnell and Higher Order Nonlinear Models for Dynamically Loaded Composite Plates and Shells
The dynamic buckling behavior of composite cylindrical shells subjected to a transverse point load is considered. The behavior of undamped cylindrical shells of varying radii is analyzed...
Postbuckling Response of Doubly-Curved Shallow Panels Under Complex Loading Conditions
The static postbuckling of laminated doubly-curved shallow panels subjected to the complex action of a system of in-plane compressive edge loads and a transverse pressure field is investigated....
Nonlinear Analysis of Stiffened Laminated Cylindrical Shells Using the Layerwise Theory of Reddy
The layerwise shell theory of Reddy is used to develop the buckling and the postbuckling equations of circular cylindrical shells reinforced by means of axial and ring stiffeners and subject...
Large Deformation Theory Using Truncated Rotations
Today's aerospace industry has advanced to the point of using optimum design techniques in virtually all applications. In structural elements, orthotropic fiber composite materials have...
Analysis of Composite Panels Using Newton's Method
Postbuckling response prediction of composite panels using Newton's method will be discussed. The traditional approach of nonlinear finite element analysis is to use a Newton-Raphson approach...
Snap Buckling of a Delaminated Layer in a Composite Cylinder
We investigate snap buckling of a thin delaminated layer on the inner surface of a contracting thick cylinder. Finite-deflection solutions of the layer with or without considering the...
Reliability of Structures for the Moon
The subject of risk and reliability for lunar structures is introduced and critical issues deliberated. A tensile structure is considered as an example in order to become more specific...
Return to search